#XBOX ONE PC CONTROLLER WIRELESS LINK SOFTWARE#
#XBOX ONE PC CONTROLLER WIRELESS LINK BLUETOOTH#

Just plug the micro-USB cable to your controller and console, then press and hold the Xbox button on the controller to pair the devices. If your controller can’t sync to the console wirelessly, try doing it while it’s tethered via a USB cable. Recharge the batteries or replace them with a new set if necessary. Weak batteries can significantly lessen the range of your controller. Be wary though as this can shorten the battery. One good trick that you can do is to engage one of the analog sticks by taping it down so the controller can continue sending command to the console. If you don’t want to keep syncing or powering it back on, try to push at least one button before 15 minutes is up. An Xbox One controller will turn off by itself if it’s not used after 15 minutes. This is a design feature and not a defect in order to extend battery life. If you noticed that your controller disconnects or turns off after leaving it for some time, don’t be alarmed. For troubleshooting purposes, try to bring the controller as close to your console as possible and see if it syncs. Thick walls, metallic objects, glass, and other sources of signal interference can dramatically reduce the operating range of your wireless controller. If you’re beyond that range, you may have difficulty using or syncing the controller with the console.

#XBOX ONE PC CONTROLLER WIRELESS LINK BLUETOOTH#

Your Xbox One controller uses Bluetooth technology to establish a connection with the console and as such, it’s only limited to about 20 feet operating range.

Use the controller right beside the console.

Disconnect another controller before connecting a new one. If you’re trying to connect another on top of the current 8, it won’t work. If you have more than one Xbox One console at home, make sure that the one you’re having trouble syncing is not already synced to another Xbox.Īlso, keep in mind that an Xbox One console only allows a maximum of 8 synced controllers.

Verify controller is not synced to another controller.

Follow the set of troubleshootings steps below to identify the reason for your problem.

#XBOX ONE PC CONTROLLER WIRELESS LINK SOFTWARE#

If your Xbox One controller is having issues when trying to connect or pair with the console, it may be due to a software glitch, signal interference, hardware bug, or other reasons. Troubleshooting Xbox One controller sync issues

Alternatively, try using a new set of batteries to be sure. If you’re using rechargeable batteries, try charging them to 100% before testing it with your controller again. Using old or weak batteries may still turn the controller on but there may not be enough power for the system to function properly. You can look into this possibility by turning off all wireless devices like phones, routers, baby monitors, microwave ovens, etc. It’s possible that one or more devices you have may be interfering with the controller’s signals. Your Xbox One controller uses the same wireless spectrum as other common home gadgets. If your Xbox One controller won’t turn on at all, there’s a different set of troubleshooting steps that you need to follow. The controller may look spotless outside but it may have an internal failure after an accidental drop. Because wireless controllers can sometimes slip from our hands, internal components may break. Controllers can die from wear and tear as well as from physical damage.

Xbox one pc controller wireless link